Not Cleaning the Surface
One of the most common mistakes people make when coating their driveway is not cleaning the surface beforehand. If you apply coating to a dirty surface, it won’t stick properly, and the coating will peel off quickly. The surface should be free from any dirt, dust, or debris. You can clean the surface using a pressure washer or a garden hose. Remove any oil stains, grime, or dirt using a high-quality cleaning solution. Allow the surface to dry completely before applying any coating.
Applying Coating in Extreme Temperatures
The second mistake people make is applying coating during extreme temperatures. Coatings manufacturers have specific temperature and humidity guidelines that one should follow when applying coating. Applying coating when the temperature is too high or too low can cause problems such as peeling and blistering. It is essential to check the weather forecast before applying any coating. A moderate temperature is best for coating, such as between 50 F to 80 F.
Not Filling Cracks and Holes
When coating a driveway, it’s essential to fill any cracks or holes. If you apply coating on a damaged surface, it won’t last long. Filling cracks and holes will not only help your coating to stick properly, but it will also ensure that your driveway stays in good condition. You can fill cracks and holes with a strong crack filler. Make sure to press the filler into the cracks to ensure there are no air pockets. Allow the filler to dry for at least 24 hours.
Wrong Type of Coating
Using the wrong type of coating is another common mistake people make. There are different types of coatings available in the market, and each coating serves a specific purpose. One type of coating may be suitable for an asphalt driveway, while another may be better for a concrete driveway. Make sure to purchase the right type of coating for your driveway. Check with the manufacturer to see which coating is recommended for your driveway type.
Not Giving Enough Drying Time
People often make the mistake of not giving enough drying time between coats. Applying multiple layers of coating without allowing the first layer to dry can cause the coating to peel off. The drying time between coats will depend on the type of coating you are using. Check the manufacturer’s guidelines for the exact drying time. A general rule of thumb is to wait at least 24 hours before applying another layer of coating.
Conclusion
In summary, these common driveway coating mistakes can be avoided. Start by cleaning the surface, choosing the right type of coating, filling any cracks, avoiding extreme temperatures, and giving each layer of coating enough drying time. By following these steps, you’ll ensure your driveway coating lasts long, leaving it looking new for years to come. Learn more about the topic with this suggested external resource. asphalt Sealer, find extra information and new perspectives on the subject discussed in this article.
To learn more, visit the related posts we’ve chosen for you. Check them out: