UTVs are versatile vehicles that provide the perfect balance between convenience and adventure. They can tackle various terrains, making them ideal for outdoor activities such as hunting, farming, and recreational riding. However, heavy snow or mud can impair a UTV’s mobility. If you’re looking to improve your UTV’s traction in harsh weather conditions, adding Camso tracks can be an excellent option. In this guide, we’ll take you through the installation process for Camso tracks on your UTV.
Before You Start
Before beginning any installation process, ensure that you have all the necessary tools at hand. A few tools required to install Camso tracks include a Torx bit, a socket wrench, a drill, and a set of pliers. Additionally, you’ll need to refer to the manufacturer’s instructions manual to ensure that you’re assembling the tracks correctly.
It is also essential to have a flat surface to work on and a clean workspace before beginning the installation process.
Unpacking and Preparing the Camso Tracks
After you have verified your toolset, start by unpacking the Camso tracks package. The Camso tracks package comes with mounting brackets, adjustable axles, and hardware (nuts, bolts, and washers) that will be required for the assembly.
Remove the tracks from the package and ensure that both tracks are positioned correctly such that the directional arrow is pointing forwards. Next, unthread the locking nut of the idler wheel and slide the wheel onto the rear idler axle. Loosely thread the locking nut back onto the rear idler axle. Repeat this process for the front idler wheel.
Installing the Mounting Brackets
After preparing the Camso tracks, it is time to install the mounting brackets onto the UTV. Begin by removing the rear tires from the UTV using a socket wrench. Next, align the mounting brackets on the wheel hub and attach them with bolts, nuts, and washers.
Using the manufacturer’s instructions as a guide, install the brackets that support the mid-wheel assembly to the UTV’s frame.
Assembling the Camso Tracks
With the mounting brackets in place, it’s time to attach the Camso tracks. Begin by inserting the adjustable axle between the two brackets that support the mid-wheel assembly. Drag the Camso tracks over the sprockets and the idler wheels. Adjust the tension on the track by moving the rear idler wheel to the back or forward, depending on the manufacturer’s recommendation.
Slide the locking nut on the idler wheels towards the adjustable axles and tighten them with a Torx bit. Using a drill, securely fasten the rear wheel support bracket to the UTV’s frame. Repeat the same process for the front wheel assembly.
Final Adjustments and Test Run
With all the components assembled, remove the UTV from the jack stands and lower it. Tighten all bolts and nuts to the recommended torque using a torque wrench. Verify that the Camso tracks move freely and that they are correctly aligned with the UTV’s configuration.
Finally, take your UTV for a test run to ensure that the installation was successful. Start slowly and monitor how the Camso tracks perform in different terrain, specifically mud, and snow surfaces.
Conclusion
Installing Camso tracks on your UTV is not a complicated process, but it requires attention to detail and proper instructions. With this guide, we hope that you have gained insight into the necessary steps required to equip your UTV with Camso tracks. Remember to closely follow the manufacturer’s instructions, and if in doubt, seek professional help. With properly installed Camso tracks, you’ll be ready to tackle any terrain with confidence. Enhance your reading and broaden your understanding of the topic with this handpicked external material for you. Examine this external resource, uncover fresh viewpoints and supplementary details!
Deepen your knowledge about the topic of this article by visiting the related posts we’ve selected for you. Enjoy: